top of page

Group

Public·45 members
Back
Elias Diaz
Elias Diaz
May 30, 2023

Laptop Battery Hacking with Be2works Full: A Step-by-Step Guide


What is Be2works full and why do you need it?




If you have ever encountered a problem with your laptop battery, such as low capacity, poor performance, or password protection, you might have wondered if there is a way to fix it without buying a new one. Well, there is a solution for that, and it is called Be2works full.




Be2works full



Be2works full is a software that allows you to repair, reset, calibrate, and optimize your laptop batteries. It works with most battery types and chips, such as BQ20xx, BQ80xx, M37512, MAX19058, MAX17058, MAX17044, MAX17040, MAX17039, MAX17020, MAX17011, MAX17010, MAX17000A/B/C/D/E/F/G/H/I/J/K/L/M/N/O/P/Q/R/S/T/U/V/W/X/Y/Z/AA/AB/AC/AD/AE/AF/AG/AH/AI/AJ/AK/AL/AM/AN/AO/AP/AQ/AR/AS/AT/AU/AV/AW/AX/AY/AZ/BA/BB/BC/BD/BE/BF/BG/BH/BI/BJ/BK/BL/BM/BN/BO/BP/BQ/BR/BS/BT/BU/BV/BW/BX/BY/BZ/CA/CB/CC/CD/CE/CF/CG/CH/, etc.


With Be2works full, you can:



  • Read and write EEPROM data from the battery chip



  • Reset passwords and calibrate batteries



  • Run learning and GPC cycles



  • Improve the battery capacity and health



  • Save money and time by repairing your own batteries



In this article, we will show you how to download and install Be2works full on your computer, how to use it to repair your laptop batteries, and how to buy it and get support from the developers.


How to download and install Be2works full




The first step to use Be2works full is to download it from the official website: https://be2works.com/download/. There are two versions available: a demo version (4.31) that has some limitations, such as not being able to write EEPROM data or reset passwords; and a full version (5.65) that has no limitations and includes all updates.


To install Be2works full on your computer, you will need:



  • An Intel Pentium processor or equivalent, 100 MHz or faster



  • Windows 8 (32 bit or 64 bit)



  • At least 64 MB of available random-access memory (RAM)



  • At least 10 MB available disk space



  • A 16-bit (thousands of colors) monitor capable of 1024x768 pixel resolution or better



  • A USB to SMBus adapter



The installation process is very simple. Just follow these steps:



  • Double-click the Battery EEPROM Works installer icon.



  • Follow the on-screen instructions.



  • Connect your USB to SMBus adapter to your computer.



  • Connect your laptop battery to the adapter using wires or clips.



  • Launch Be2works full from your desktop or start menu.



How to use Be2works full to repair laptop batteries




Once you have installed Be2works full on your computer and connected your laptop battery to it, you are ready to start repairing it. Be2works full has a user-friendly interface that shows you all the information and functions you need.


The main window of Be2works full consists of four tabs:



  • Battery info: This tab shows you the basic information about your battery, such as model number, serial number, manufacturer name, design capacity, current capacity, cycle count, voltage, temperature, etc.



  • Data flash: This tab shows you the EEPROM data from the battery chip in hexadecimal format. You can read and write this data using the buttons at the bottom of the tab.



  • Passwords: This tab shows you the passwords that are stored in the battery chip. You can reset these passwords using the buttons at the bottom of the tab.



  • Cycles: This tab shows you the learning and GPC cycles that are performed by the battery chip. You can run these cycles using the buttons at the bottom of the tab.



In this section, we will explain how to use each of these tabs in more detail.


How to read and write EEPROM data




The EEPROM data is the information that is stored in the battery chip. It contains various parameters that affect the battery performance, such as design capacity, current capacity, cycle count, calibration data, etc. By reading and writing this data, you can modify these parameters according to your needs.


To read EEPROM data from the battery chip using Be2works full:



  • Select the Data flash tab.



  • Select your chip type from the drop-down menu at the top left corner of the tab.



  • Click on Read button at the bottom left corner of the tab.



  • The EEPROM data will be displayed in hexadecimal format in a table.



  • You can save this data as a file by clicking on Save button at the bottom right corner of the tab.



To write EEPROM data to the battery chip using Be2works full:



  • Select the Data flash tab.



  • Select your chip type from the drop-down menu at the top left corner of the tab.



  • Click on Load button at the bottom right corner of the tab.



  • Select a file that contains EEPROM data in hexadecimal format.



  • The EEPROM data will be loaded into a table.



  • You can edit this data by double-clicking on any cell in the table.



  • Click on Write button at the bottom left corner of the tab.



  • The EEPROM data will be written to the battery chip.



How to reset passwords and calibrate batteries




Sometimes, laptop batteries are protected by passwords that prevent unauthorized access or modification. These passwords are stored in the battery chip. By resetting these passwords using Be2works full, you can unlock your battery and access its functions. Calibrating a battery means adjusting its parameters so that they match the actual state of charge and discharge. By calibrating your battery using Be2works full, you can improve its accuracy and performance. To reset passwords from the battery chip using Be2works full:



  • Select the Passwords tab.

  • Select your chip type from the drop-down menu at the top left corner of the tab.

  • Select password type from the drop-down menu at the top right corner of the tab.

  • Click on Reset button at the bottom left corner of the tab.

  • The password will be reset to 0000 or 00000000 depending on the chip type.



To calibrate a battery using Be2works full:



  • Select the Battery info tab.



  • Select your chip type from the drop-down menu at the top left corner of the tab.



  • Click on Calibrate button at the bottom left corner of the tab.



  • The calibration process will start and you will see a progress bar and a message box.



  • Wait until the calibration is finished and click on OK button in the message box.



  • The battery parameters will be updated and displayed in the Battery info tab.



How to run learning and GPC cycles




Learning and GPC cycles are processes that are performed by the battery chip to improve the battery capacity and health. Learning cycles are used to measure the actual capacity of the battery and store it in the EEPROM data. GPC cycles are used to optimize the gas gauge algorithm and reduce the error between the reported and actual state of charge.


To run learning and GPC cycles using Be2works full:



  • Select the Cycles tab.



  • Select your chip type from the drop-down menu at the top left corner of the tab.



  • Select the cycle type from the drop-down menu at the top right corner of the tab. You can choose between manual or full automatic mode.



  • Click on Start button at the bottom left corner of the tab.



  • The cycle process will start and you will see a progress bar and a message box.



  • Wait until the cycle is finished and click on OK button in the message box.



  • The battery parameters will be updated and displayed in the Battery info tab.



How to buy Be2works full and get support




If you are satisfied with Be2works full and want to purchase it, you can do so from the official website: https://be2works.com/buy-now/. There are different options available depending on your needs and preferences.


Pricing and payment options




The current price of Be2works full is $350. This includes a lifetime license and all 5.xx updates for free. You can pay for it using PayPal or credit card. You will receive an email with your license key and download link after your payment is confirmed.


If you already own Be2works 4.xx (Bohol) and want to upgrade to Be2works 5.xx (Boracay), you can do so for $150. You will need to provide your old license key and email address when you contact be2support@gmail.com to request this option.


Updates and license activation




To get the latest version of Be2works full, you can check for updates from within the software by clicking on Help > Check for updates. You can also download it from the official website: https://be2works.com/download/.


To activate your license key, you need to enter it in Be2works full by clicking on Help > Enter license key. You can activate your license key up to three times per year. This means that you can change your hardware or PC without losing your license. If you need more activations, you can contact be2support@gmail.com and pay $30 for each additional activation.


Remote password reset service




If you have a battery with a BQ20xx or BQ20Zxx chip that is password protected, you can use Be2works full to reset it. However, if you encounter any difficulties or errors, you can also get help from the developers by using their remote password reset service.


This service costs $15 per battery and requires that you have AnyDesk installed on your computer. AnyDesk is a software that allows remote access and control of your computer by another person. You can download it from https://anydesk.com/en.


To use this service, you need to contact be2support@gmail.com and provide them with your AnyDesk ID and password. They will connect to your computer remotely and reset your battery password using Be2works full. You can watch them do it on your screen and ask them any questions you have.


Conclusion




Be2works full is a powerful software that allows you to repair, reset, calibrate, and optimize your laptop batteries. It works with most battery types and chips, such as BQ20xx, BQ80xx, M37512, MAX19058, MAX17058, MAX17044, MAX17040, MAX17039, MAX17020, MAX17011, MAX17010, MAX17000A/B/C/D/E/F/G/H/I/J/K/L/M/N/O/P/Q/R/S/T/U/V/W/X/Y/Z/AA/AB/AC/AD/AE/AF/AG/AH/AI/AJ/AK/AL/AM/AN/AO/AP/AQ/AR/AS/AT/AU/AV/AW/AX/AY/AZ/BA/BB/BC/BD/BE/BF/BG/BH/BI/BJ/BK/BL/BM/BN/BO/BP/BQ/BR/BS/BT/BU/BV/BW/BX/BY/BZ/CA/CB/CC/CD/CE/CF/CG/CH/, etc.


You can download and install Be2works full on your computer easily and quickly. You can use it to read and write EEPROM data from the battery chip, reset passwords and calibrate batteries, and run learning and GPC cycles. You can improve the battery capacity and health, and save money and time by repairing your own batteries. You can buy Be2works full from the official website for $350, which includes a lifetime license and all 5.xx updates for free. You can pay for it using PayPal or credit card. You can also get support from the developers by contacting them via email or using their remote password reset service. Be2works full is a must-have software for anyone who wants to extend the life of their laptop batteries and enjoy a better performance. It is easy to use, reliable, and affordable. Don't wait any longer and get Be2works full today!


FAQs





  • What is Be2works full?



Be2works full is a software that allows you to repair, reset, calibrate, and optimize your laptop batteries.


  • How much does Be2works full cost?



Be2works full costs $350 for a lifetime license and all 5.xx updates for free.


  • How do I install Be2works full?



You need to download it from https://be2works.com/download/ and follow the on-screen instructions.


  • What do I need to use Be2works full?



You need a USB to SMBus adapter and a laptop battery that is compatible with Be2works full.


  • How do I get support for Be2works full?



You can contact be2support@gmail.com or use their remote password reset service using AnyDesk.



About

Welcome to the group! You can connect with other members, ge...
Read more

Members

See All Members (45)
Group Page: Groups_SingleGroup
bottom of page